You might assume that doubling your Bluetooth speaker’s wattage will double its loudness, but audio physics and speaker specs don’t work that way.
Speaker power can also be measured in two different ways: RMS (root mean square) and peak ratings. Manufacturers and retailers often list only one of these two figures, making it difficult to compare different speakers based on their power rating alone. So how many watts do you actually need in a Bluetooth speaker and what should you look out for when shopping for one? Here’s a quick rundown.
RMS vs. peak power ratings on Bluetooth speakers
It’s common for a speaker to boast a peak power rating of 40W while only handling 20W RMS during continuous operation. However, manufacturers rarely disclose the RMS power rating for each model and often opt to publish the maximum power figure instead. This makes the speaker seem more impressive on paper, especially when compared with the RMS ratings of competing speakers.
Brick-and-mortar and online retailers often don’t distinguish between the RMS and peak power ratings either. Take the JBL Go 4, for instance. JBL’s official spec sheet rates it at 4.2W RMS, but Target doesn’t list the power ratings. Some manufacturers don’t publish RMS ratings at all, so you might have to look for independent reviews that report real-world testing data.
Even between two accurate RMS figures, though, you can’t conclude that a higher rating always results in a better speaker. The actual speaker drivers and their sensitivity play a far more important role. An efficient 10-watt speaker may very well outperform a 20-watt model, so it’s best to use power ratings as a starting point rather than a definitive point of comparison.
Doubling the power rating doesn’t double the loudness
Put simply, you only get a 3 dB sound level increase going from 10W to 20W, another 3 dB jump going from 20W to 40W and so on. You need a tenfold jump in power to double the loudness. The difference between a 25W and a 35W speaker is therefore not as significant as you might think.
Finally, keep in mind that even speakers within the same power range can offer drastically different sound profiles and volume levels. It’s difficult to gauge a speaker’s performance based on the spec sheet, power rating or size alone. Size is especially important for Bluetooth speakers because a large battery can inflate the physical size of the unit, making it seem louder than it actually is.
How many watts do I need in a Bluetooth speaker?
Moving up the ladder, you’ll find speakers with up to 40W of rated RMS power. These are still relatively portable units, yet often pack two speaker drivers instead of one. The advantage is that they sound clearer and don’t need to be pushed all the way to 100 percent volume to fill a small space.
In the 40W to 100W range, you’ll find several Bluetooth speakers that claim to be suited for outdoor use — and that’s largely true if you intend to use them in your backyard. The Soundcore Boom 3i, for instance, boasts a 50W RMS power rating and is marketed as being loud enough to overcome environmental sounds. At the far end of the spectrum, you’ll find units like the JBL Boombox and PartyBox series with 200W and even 80W RMS power ratings. These speakers are best suited for large outdoor venues and parties. They are loud, but the extra power rating also requires scaling up other internal components. This makes them heavier, larger and less portable.
As you’ve probably guessed by now, the ideal power rating depends entirely on your intended use case. For indoor use, most sub-50-watt Bluetooth speakers will suffice. But if you’re in noisier environments or frequently find yourself listening to music outdoors, you might want to shop for Bluetooth speakers with a higher power rating.
